Earlier today, I noticed that we now have over 500 developers from around the globe who I have accepted pull-requests from1. That is so fantastic.
Thanks to each and every one of you who has helped make this project so wonderful for others. :-)
1 This number could be a lot higher if I spent more than a hour or two a week on this, but I’m a big fan of slow and steady… a good number of the open pull-requests are themes at the moment.
I love the OhMyZsh community. Let’s grow it a little more this next Tuesday.
Welcome to what seems like my tenth installment (actually, it’s the fourth) of showing you how I setup my development environment on a fresh OSX install. In this case, I’m actually getting a MacBook setup for a new employee with Snow Leopard.
Over the years, I’ve evolved these following steps and they’ve helped our team maintain a consistent and stable envirnment for Ruby on Rails development. I know that there are a few other ways to approaching this and I’m sure you’ll get similar results, but this approach has allowed me to maintain a hassle-free setup for the last five years.
As with all things… your milage may vary.
During this initial phase, we’re going to install the primary dependencies and setup our environment.
The first thing that you’ll need to do is install XCode, which almost everything depends upon as this will install developer-friendly tools for you. Apple has been kind enough to ship this on your Snow Leopard DVD.
Go ahead and install XCode from the Optional Installs folder.
(might require a reboot)
You can also download it online.
Now we’ll install MacPorts, which the web site describes itself as, “an open-source community initiative to design an easy-to-use system for compiling, installing, and upgrading either command-line, X11 or Aqua based open-source software on the Mac OS X operating system.”
As I’ve said in past versions of this guide, this tool is about to become one of the most important tools on your operating system. It’ll be used time and time again to maintain your libraries and many of the Unix tools that you’ll be using. If you’re from the Linux or BSD world, you are likely familiar with similar tools… such as:
You’ll want to download the latest stable version from http://www.macports.org/. Once downloaded, you can install it.
Once this is installed, you’ll be able to use the
port command from your console.
Let’s test out your MacPorts install by installing a useful tool called wget, which we’ll use to install oh-my-zsh.
sudo port install wget
Git and Subversion
Every development environment should have some source code management tools available. We’ll install both of these with one command.
sudo port install git-core +svn
This will install git and subversion.
Oh My Zsh is the most amazing thing to happen to shells since… well since I said so. It’s one of my open source projects that I encourage you to give a whirl.
wget http://github.com/robbyrussell/oh-my-zsh/raw/master/tools/install.sh -O - | sh
That’s it. The next time you open up your terminal, you’ll be running zsh with a bunch of stuff available. For more information, visit http://github.com/robbyrussell/oh-my-zsh.
Terminal theme (optional)
I never understood why the icon for Terminal has a black background but when you start it up the default theme is black on white.
Anyhow, I’m a fan of the the dark background. To change this, open up preferences in Terminal. Select Pro, then click on the Default window so that this sticks around.
Let’s now open up a new Terminal window..
You should be looking at something like this:
Much better… let’s continue.
We’re now going to start installing everything we need to get this running.
First up, Ruby.
Snow Leopard includes Ruby and Rails already installed, but we’re going to back these up for a rainy day. Just issue these commands:
$ sudo su - Password: :~ root# mv /usr/bin/ruby /usr/bin/ruby.orig :~ root# mv /usr/bin/gem /usr/bin/gem.orig :~ root# mv /usr/bin/rails /usr/bin/rails.orig :~ root# logout
Now we’ll go ahead and install a fresh copy of Ruby and RubyGems via MacPorts.
sudo port install ruby rb-rubygems
You should now see something like this for a bit…
Let’s watch a video about bumble bees.
When it finishes installing, you should check that Ruby is available to you and installed in
We’ll also take a second to create a symlink for this as some tools seem to rely on
/usr/bin/ruby being there.
sudo ln -s /opt/local/bin/ruby /usr/bin/ruby
Great, let’s move on.
Now that we have Ruby installed, we’re going to take a quick detour to setup Passenger with the Apache server already available on your machine. I’ve been a big fan of using Passenger for your development for over a year now.
sudo gem install passenger
Once the gem is finished installing, you’ll need to install the apache2 module with the following command:
It’ll ask you to continue by pressing Enter. At this point, it’ll check that you have all the necessary dependencies and then compile everything needed for Apache2.
Now I’ll force you to watch a highlights reel of Fernando Torres… the best striker in the world!
The passenger install will then show you this output, which you’ll want to stop and read for a moment and highlight the following:
Then using vi or emacs, you’ll want to create a new file with the following content:
Then paste in the following (what you highlighted and copied above.)
LoadModule passenger_module /opt/local/lib/ruby/gems/1.8/gems/passenger-2.2.9/ext/apache2/mod_passenger.so PassengerRoot /opt/local/lib/ruby/gems/1.8/gems/passenger-2.2.9 PassengerRuby /opt/local/bin/ruby
You’ll also want to include the following below what you just pasted.
# Set the default environment to development RailsEnv development # Which directory do you want Apache to be able to look into for projects? <Directory "/Users/ryangensel/development"> Order allow,deny Allow from all </Directory>
You’ll want to quickly start up your web sharing, which will start Apache2 up via your System Preferences.
Simple enough… moving forward.
Passenger Pref Pane
To make things as simple as possible, I’d encourage you to install the Passenger Preference Pane (view this post for a download).
I have a directory named
development/ in my home directory, which is where I end up storing all of my projects. This should match whatever you put above in the apache configuration (
mkdir development; cd development;
Installing Ruby on Rails via RubyGems
Now we’ll use RubyGems to install the latest version of Ruby on Rails (and all of it’s dependencies).
sudo gem install rails
While this is installing, you can watch a video from my old band that ended around the time that business started picking up for Planet Argon.
Great, let’s test out the install of Rails…
Test Rails and Passenger
In your development directory, let’s quickly a new Rails app…
This will generate a new Rails application in a
Now open up the Passenger Preferences Pane and add this directory as a new application.
You should now fire up your browser of choice and head to
http://testapp.local. If all has worked, you’ll see a, “Welcome aboard” screen from the Ruby on Rails application.
Assuming that this worked for you, let’s take a quick break to make some tea…
In this last phase, we’re going to install a few database servers and corresponding rubygems so that you can get to work.
At this point in time, the current stable version of PostgreSQL via MacPorts is 8.4.x. Let’s install that now…
sudo port install postgresql84 postgresql84-server
Once this finishes compiling, you’ll need to run the following commands to setup a new PostgreSQL database.
sudo mkdir -p /opt/local/var/db/postgresql84/defaultdb sudo chown postgres:postgres /opt/local/var/db/postgresql84/defaultdb sudo su postgres -c '/opt/local/lib/postgresql84/bin/initdb -D /opt/local/var/db/postgresql84/defaultdb'
Assuming that you want PostgreSQL to always be running, you can run:
sudo launchctl load -w /Library/LaunchDaemons/org.macports.postgresql84-server.plist
...and to start it right now, run:
sudo launchctl start org.macports.postgresql84-server
Before you can start using it, we’ll need to make sure that the PostgreSQL executables are available in your shell path. Since you’re now using oh-my-zsh, you’ll want to edit
~/.zshrc with your favorite editor.
Just append this to
export PATH= line in the file.
Your PATH might look something like the following now:
@# Customize to your needs… export PATH=/opt/local/bin:/opt/local/sbin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin:/opt/local/lib/postgresql84/bin@
Setup database user
To setup a new database (with superuser credentials), just run:
createuser --superuser ryangensel -U postgres
We’ll now test creating a database:
Let’s test that we can access it…
➜ ~ psql test_db psql (8.4.2) Type "help" for help. test_db=# \q
Great, let’s drop it now.
➜ ~ dropdb test_db ➜ ~ psql test_db psql: FATAL: database "test_db" does not exist ➜ ~
Okay, we’ll now install the library that will allow Ruby to talk to PostgreSQL.
sudo gem install pg
Voila… let’s move on to the inferior database…
We’re going to run through the installation of MySQL really quickly because you might need it.
sudo port install mysql5 mysql5-server
This took ages on my machine… so let’s watch a video.
We’ll now setup the database and make sure it starts on system boot.
sudo -u _mysql mysql_install_db5 sudo launchctl load -w /Library/LaunchDaemons/org.macports.mysql5.plist sudo launchctl start org.macports.mysql5
Let’s test that we can create a database now (and that it’s running.)
➜ ~ mysql5 -u root Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 3 Server version: 5.1.43 Source distribution Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. mysql> create database test1; Query OK, 1 row affected (0.00 sec) mysql> \q
Great, we’ll now install the library that will allow Ruby to talk to MySQL.
sudo gem install mysql -- --with-mysql-config=/opt/local/lib/mysql5/bin/mysql_config
That should be it!
Phase Four, next steps
Okay… so we’ve installed XCode, MacPorts, Ruby, Rails, PostgreSQL, MySQL… and I’ve also got you to switch your default terminal shell from bash to zsh. You might take a look over the available themes for Oh My Zsh so that you can personalize your terminal experience even further.
You also now have a handful of gems installed as you can see with
This is the fourth version of this guide and I’ve appreciated the hundreds of comments, questions, and emails that I have received… let’s not forget all those beers that people buy me when I’m at conferences. :-)
I hope you have found some of this useful. If you have any problems and/or questions, don’t hesitate to post them in the comments section below.
1 comment Latest by Jason Green Fri, 29 Jan 2010 15:11:02 GMT
Here is a sampling of some of the themes that you can use out of the box with Oh My Zsh.
Oh My Zsh is much more than a collection of themes for your zsh config. It’s a way of life1.
Also, be sure to follow ohmyzsh on twitter now!
1 well.. at least while you’re in the terminal. ;-)
I wanted to publically thank everyone for helping me get Oh My Zsh out there and continue to improve it. Many of us spend a lot of time in our terminals throughout the day and I firmly believe that having a well-working shell is nearly as important as having a well-working texteditor.
While Oh My Zsh isn’t a large project, it is my attempt to share what I’ve learned about using zsh with others… but honestly, my goal is to learn from you. I don’t have a lot of time to really dive into the deepend of the zsh-pool so am relying on others to share their tricks, hacks, functions, themes, etc. So, I thought that if I created a basic framework with outlined some conventions so that others could contribute, that perhaps I’d end up with a kickass shell.
Last week, I pushed out an update that introduces an auto-update feature. I’m quite keen of desktop applications that can auto-update themselves, so our initial version of this feature will ask you no more than once a week if you want to check for updates. This means that as we continue to extend and improve Oh My Zsh, you can keep up-to-date.
It’s the beginning of a new month… are you still using Bash? Perhaps you’re using your own zsh configuration but want to see what else zsh can offer you? I invite you to install Oh My Zsh today. :-)
Just run this in your terminal and you’ll get setup. Don’t worry… you won’t lose your existing configuration. :-)
wget http://github.com/robbyrussell/oh-my-zsh/raw/master/tools/install.sh -O - | sh
For more infromation, visit http://github.com/robbyrussell/oh-my-zsh/
I just pushed a small change to Oh My Zsh, which gives it rudimentary support for themes. What I’m hoping to do is collect prompts from tons of people and make it simple for others to find a PROMPT that works well for them.
As of right now, there are only three for you to choose from. So, please head over to github, fork Oh My Zsh, add your theme, and send a pull request. :-)
Once I get it merged in, we’ll get a screenshot of it added to the Oh My Zsh wiki. (see themes)
I know that many of you have some really sweet prompts configured as I got a lot of response with my post, Show me your and I’ll show you mine.
Older posts: 1 2